1. Disconnect the negative battery cable.
2. Remove the dashboard under cover (Driver side). (See
DASHBOARD UNDER COVER
REMOVAL/INSTALLATION
.)
3. Remove the auto light/wiper control module. (Vehicles with auto light/wiper system) (See
AUTO
LIGHT/WIPER CONTROL MODULE REMOVAL/INSTALLATION
.)
4. Remove the auto light-off control module. (Vehicles without auto light/wiper system) (See
AUTO
LIGHT-OFF CONTROL MODULE REMOVAL/INSTALLATION
.)
5. Remove in the order indicated in the table.
6. Install in the reverse order of removal.
Fig. 52: Identifying Keyless Control Module, Connector & Screw
Courtesy of MAZDA MOTORS CORP.
KEYLESS CONTROL MODULE INSPECTION [ADVANCED KEYLESS
SYSTEM]
1. Measure the voltage or inspect for continuity according to the Terminal Voltage Table (Reference).
z
If the voltage is not as specified in the Terminal Voltage Table (Reference), inspect the parts under
"Inspection item(s)" and related wiring harnesses.
{
Steering lock unit programming (See STEERING LOCK UNIT ID CODE
REGISTRATION [ADVANCED KEYLESS SYSTEM].)
{
Immobilizer system resetting (with immobilizer system) (See
IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION
AND CLEARING [ADVANCED KEYLESS SYSTEM].) (See
IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION
AND CLEARING [KEYLESS ENTRY SYSTEM].)
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:58 AM
Page 29
© 2005 Mitchell Repair Information Company, LLC.
