Fig. 3: Identifying Identification Mark On Mounting Rubber
Courtesy of MAZDA MOTORS CORP.
FRONT SHOCK ABSORBER AND COIL SPRING INSTALLATION NOTE
1. Align the identification mark on the mounting rubber with the mark on the body.
Fig. 4: Aligning Identification Mark On Mounting Rubber With Mark On Body
Courtesy of MAZDA MOTORS CORP.
2. Install the front shock absorber installation bolts from the following directions.
{
LH: Insert the bolts from the vehicle rear
{
RH: Insert the bolts from the vehicle front
Fig. 5: Locating Front Shock Absorber Installation Bolts
2008 Mazda CX-9 Grand Touring
2008 SUSPENSION Front Suspension - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:23:19 AM
Page 3
© 2005 Mitchell Repair Information Company, LLC.
