CALIPER (REAR) DISASSEMBLY/ASSEMBLY
1. Disassemble in the order indicated in the table.
Fig. 39: Identifying Caliper Sequence (Rear) & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
2. Assemble in the reverse order of removal.
PISTON DISASSEMBLY NOTE
1. Place a piece of wood in the caliper, then blow compressed air through the hole to force the piston out of
the caliper.
WARNING:
z
When compressed air is blown into the caliper body, injury to a
finger or other part from pinching could result from the piston
springing up. When blowing in compressed air, do not place your
fingers between the piston and caliper body when performing the
work.
CAUTION:
z
The piston could be damaged if blown out with great force. Blow the
compressed air slowly to prevent the piston from suddenly popping
out.
2008 Mazda CX-9 Grand Touring
2008 BRAKES Conventional Brake System - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:48:49 AM
Page 32
© 2005 Mitchell Repair Information Company, LLC.
