1. Perform "Preparation".
2. Connect the M-MDS to the DLC-2.
3. Set up an active command mode inspection according to the combination of commands below.
BRAKE PRESSURE RETENTION REFERENCE CHART
4. Send the command while rotating the wheel being inspected by hand in a forward direction.
5. Confirm that the wheel does not rotate easily while a DSC/RSC HU/CM operation click sound is heard.
z
Performing the inspection above determines the following:
CAUTION:
z
To protect the DSC/RSC HU/CM, the solenoid valve and the
pump motor used during active command mode stay on for only
10 s or less each time they are switched on.
Fig. 4: Connecting M-MDS To DLC-2
Courtesy of MAZDA MOTORS CORP.
Command name
Inspected wheels
Understeer control inhibited Oversteer control inhibited
LF
RF
LR
RR
V_TRC_L
ON
OFF
ON
V_TRC_R
OFF
ON
OFF
V_STB_L
OFF
V_STB_R
V_LF_INL
OFF
OFF
OFF
ON
V_LF_OTL
OFF
V_LR_INL
ON
V_LR_OTL
OFF
V_RF_INL
ON
V_RF_OTL
OFF
V_RR_INL
ON
V_RR_OTL
OFF
PMP_MOTOR
ON
2008 Mazda CX-9 Grand Touring
2008 BRAKES Dynamic Stability Control/Roll Stability Control - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:40:24 AM
Page 6
© 2005 Mitchell Repair Information Company, LLC.
