3
INSPECT FUEL INJECTOR NO.5 CONNECTOR
FOR POOR CONNECTION
z
Turn the ignition switch off.
z
Disconnect the fuel injector No.5 connector.
z
Inspect for poor connection (such as
damaged/pulled-out pins, corrosion).
z
Are there malfunction?
Yes Repair or replace suspected part,
then go to Step 8.
No
Go to the next step.
4
INSPECT PCM CONNECTOR FOR POOR
CONNECTION
z
Turn the ignition switch off.
z
Disconnect the PCM connector.
z
Inspect for poor connection (such as
damaged/pulled-out pins, corrosion).
z
Is there malfunction?
Yes
Repair or replace suspected part,
then go to Step 8.
No
Go to the next step.
5
INSPECT FUEL INJECTOR NO.5 POWER SUPPLY
CIRCUIT FOR OPEN CIRCUIT
z
Turn the ignition switch to the ON position (Engine
off).
z
Measure the voltage between fuel injector No.5
connector terminal B and body ground.
z
Is the voltage B+?
Yes Go to the next step.
No
Repair or replace suspected part,
then go to Step 8.
6
INSPECT FUEL INJECTOR NO.5 SIGNAL
CIRCUIT FOR OPEN CIRCUIT
z
Inspect continuity between fuel injector No.5
terminal A (wiring harness-side) and PCM terminal
2BB (wiring harness-side).
z
Is there continuity?
Yes Go to the next step.
No
Repair or replace suspected part,
then go to Step 8.
7
INSPECT FUEL INJECTOR NO.5
z
Inspect the fuel injector No.5. (See
FUEL
INJECTOR INSPECTION [MZI-3.7]
.)
z
Is there any malfunction?
Yes
Replace the fuel injector No.5, then
go to the next step.
No
Go to the next step.
8
VERIFY TROUBLESHOOTING OF DTC P0205
HAS BEEN COMPLETED
z
Verify that all disconnected connectors
reconnected.
z
Clear DTC from memory using M-MDS.
z
Start the engine.
Yes Replace the PCM, then go to the
next step.
2008 Mazda CX-9 Grand Touring
2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:08:36 AM
Page 130
© 2005 Mitchell Repair Information Company, LLC.
