6. Set the drive shaft to the standard length.
Rear drive shaft standard length
LH: 840.3-850.3 mm {33.09-33.47 in}
RH: 895.3-905.3 mm {35.25-35.64 in}
7. Verify that the drive shaft length is within the standard.
z
If not, repeat from Step 5.
BOOT BAND (DIFFERENTIAL SIDE) ASSEMBLY NOTE
1. Fold the band in the direction opposite to the forward revolving direction of the drive shaft and use pliers
to pull it tight.
2. Lock the end of the band by bending the locking clips.
CAUTION:
z
Do not let grease leak.
z
Do not damage the boot.
Fig. 59: Lifting Boot With Cloth Wrapped Screwdriver
Courtesy of MAZDA MOTORS CORP.
CAUTION:
z
Install the band into the groove securely.
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLES Drive Shaft - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:50:58 AM
Page 38
© 2005 Mitchell Repair Information Company, LLC.
