DTC DISPLAY
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
1. Select "Self Test".
2. Select "Modules".
3. Select "RCM".
z
When using the PDS (Pocket PC)
1. Select "Module Tests".
2. Select "RCM".
3. Select "Self Test".
Fig. 3: Identifying DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
3. Verify the DTC according to the directions on the screen.
z
If any DTCs are displayed, perform troubleshooting according to the corresponding DTC
inspection.
4. After completion of repairs, clear all DTCs stored in the SAS control module. (See
CLEARING DTC
.)
CLEARING DTC
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
1. Select "Self Test".
2. Select "Modules".
3. Select "RCM".
z
When using the PDS (Pocket PC)
1. Select "Module Tests".
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:18:46 AM
Page 4
© 2005 Mitchell Repair Information Company, LLC.
