1
INSPECT DTC IN DSC/RSC HU/CM
z
Inspect DTC for the ON-BOARD
DIAGNOSTIC SYSTEM.
z
Have DTCs been stored in memory?
Yes
Perform the applicable DTC inspection (See
ON-BOARD DIAGNOSIS [DSC/RSC]
.)
No
Go to the next step.
2
VERIFY THAT EACH SENSOR IS
INSTALLED
z
Are the combined sensor and steering
angle sensor securely installed?
Yes Go to the next step.
No
Install the suspect sensor securely.
3
VERIFY EACH SENSOR IS
INITIALIZED
z
Was initialized performed after
replacement of the DSC/RSC HU/CM
or combined sensor?
Yes Go to the next step.
No
Perform initialization procedure. (See
DSC/RSC SENSOR INITIALIZATION
PROCEDURE
.)
4
VERIFY THAT TIRE CONDITION
z
Verify tire condition for following:
z
Air pressure
z
Wear
z
Grip level (different by four wheels)
z
Are tires conditions okay?
Yes Go to the next step.
No
Adjust, repair or replace suspect tire.
5
VERIFY SUSPENTION PART
z
Verify vehicle posture.
z
Is there an inclination in the posture of
the vehicle right and left, left and rear?
Yes
Inspect the following suspension part:
z
Shock absorber
z
Stabilizer
No
Find malfunctioning part according to
"intermittent concern troubleshooting".
2008 Mazda CX-9 Grand Touring
2008 BRAKES Symptom Troubleshooting (DSC/RSC) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:41:34 AM
Page 14
© 2005 Mitchell Repair Information Company, LLC.
