Fig. 11: Identifying Bolts, Nuts, And Plate With SST
Courtesy of MAZDA MOTORS CORP.
4. Assemble the
SST
(bolts, nuts, and plate) set in Step 3 to the
SST
(arms) set in Step 2.
5. Adjust the
SSTs
(bolts) so that
approx. 20 mm {0.79 in}
of thread is exposed from the side of the
SST
(plate).
6. Make the
SSTs
(arms and plate) parallel by adjusting the
SSTs
(bolts and nuts).
7. Tighten the
SSTs
(bolts and nuts) to affix the
SSTs
firmly.
Fig. 12: Identifying Engine With SST
Courtesy of MAZDA MOTORS CORP.
8. Mount the engine on the
SST
(engine stand).
WARNING:
z
Self-locking brake system of the engine stand may not be
effective when the engine is held in an unbalanced position.
This could lead to sudden, rapid movement of the engine and
mounting stand handle and cause serious injury. Never keep
the engine in an unbalanced position, and always hold the
rotating handle firmly when turning the engine.
2008 Mazda CX-9 Grand Touring
2008 ENGINE Lubrication (MZI-3.7) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:01:14 AM
Page 11
© 2005 Mitchell Repair Information Company, LLC.