Fig. 4: Identifying Front Seat Connector & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
FRONT SEAT DISASSEMBLY/ASSEMBLY
1. Disconnect the negative battery cable and wait for
more than 1 minute.
2. Remove the side air bag module. (See
SIDE AIR BAG MODULE REMOVAL/INSTALLATION
.)
3. Disassemble in the order indicated in the table.
4. Assemble in the reverse order of disassembly.
DRIVER SEAT (MANUAL SEAT)
WARNING:
z
Handling the front seat (with a side air bag) improperly can
accidentally deploy the air bag, which may seriously injure you.
Read the service warnings and cautions before handling the front
seat (with a side air bag). (See AIR BAG SYSTEM SERVICE
WARNINGS .) (See AIR BAG SYSTEM SERVICE CAUTIONS .)
CAUTION:
z
If any of the following work is performed, perform the seat weight
sensor calibration using the M-MDS. (See SEAT WEIGHT SENSOR
CALIBRATION .)
{
Replacement with a new seat weight sensor
{
Replacement with a new seat weight sensor control module
{
Replacement with new passenger-side seat parts
{
Disassembly of the passenger-side seat
z
If any of the following work is performed, perform the seat weight
sensor inspection using the M-MDS. (See SEAT WEIGHT SENSOR
INSPECTION .)
{
Removal of the passenger-side seat
{
Loosening and retightening of passenger's seat fixing bolts
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Seats - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:40:01 AM
Page 3
© 2005 Mitchell Repair Information Company, LLC.
