3. Verify that the security light illuminates for
approx. 3 s
, and then goes out.
4. Turn the ignition switch to the LOCK position.
5. Connect the M-MDS to the DLC-2. (See
M-MDS MENU
.)
6. Using key 2, turn the ignition switch to the ON position.
7. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
Select "Body".
Select "Security".
z
When using the PDS (Pocket PC)
Select "Programming".
8. Then, select items from the screen menu in the following order.
z
Select "PATS Functions".
9. Select "Program additional ignition key" from the M-MDS screen menu and perform the procedure
according to the M-MDS screen
10. Perform the security access according to the directions on the M-MDS screen. (See
SECURITY
ACCESS PROCEDURE
.)
11. After verifying that the PATS function menu is displayed again on the M-MDS screen, select the "Exit
(From This Menu)" to finish the M-MDS procedure.
12. After Step 11, wait 5
s or more
, and then turn the ignition switch to the LOCK position.
13. Verify that the all keys can start the engine for
5 s or more
after the procedure.
Procedure (If two or more keys are to be programmed)
performed. If the engine is started with the card key, remove the
card key from the vehicle after the engine is started.
NOTE:
z
Although the security light starts flashing and DTC 15 is displayed
after approx. 1 min, this does not indicate an improper procedure.
Continue to perform the procedure as indicated.
NOTE:
z
After selecting the above menu, "This operation has been
successful" is displayed. At this point, the key that turned the
ignition switch to the ON position is completely programmed.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:58 AM
Page 63
© 2005 Mitchell Repair Information Company, LLC.
