Mazda CX-9 Grand Touring 2008, Руководство пользователя

Страница: 66 / 2589

REMOVAL/INSTALLATION .)
z
Is there any malfunction of the passenger-side
side air bag sensor No.2 connector?
2
INSPECT WIRING HARNESS BETWEEN
PASSENGER-SIDE SIDE AIR BAG SENSOR
NO.2 AND SAS CONTROL MODULE
z
Turn the ignition switch to the LOCK position.
z
Disconnect the negative battery cable and wait
for
1 min or more.
z
Remove the column cover. (See COLUMN
COVER REMOVAL/INSTALLATION .)
z
Disconnect the clock spring connector. (See
COMBINATION SWITCH
REMOVAL/INSTALLATION
.)
z
Remove the glove compartment. (See GLOVE
COMPARTMENT
REMOVAL/INSTALLATION
.)
z
Disconnect the passenger-side air bag module
connector. (See PASSENGER-SIDE AIR
BAG MODULE
REMOVAL/INSTALLATION .)
z
Disconnect the driver and passenger-side front
seat connectors. (See
FRONT SEAT
REMOVAL/INSTALLATION .)
z
Disconnect the driver and passenger-side curtain
air bag module connectors. (See
CURTAIN
AIR BAG MODULE
REMOVAL/INSTALLATION
.)
z
Remove the B-pillar lower trim. (See B-
PILLAR LOWER TRIM
REMOVAL/INSTALLATION
.)
z
Disconnect the driver and passenger-side pre-
tensioner seat belt connectors. (See
FRONT
SEAT BELT
REMOVAL/INSTALLATION
.)
z
Disconnect the SAS control module connectors.
(See SAS CONTROL MODULE
REMOVAL/INSTALLATION .)
z
Inspect the wiring harnesses between SAS
control module terminal 2AA and passenger-
side side air bag sensor No.2 terminal A, SAS
control module terminal 2AE and passenger-
side side air bag sensor No.2 terminal B for the
Yes
Replace the passenger-side side air bag
sensor No.2, then go to the next step.
(See
SIDE AIR BAG SENSOR NO.
2 REMOVAL/INSTALLATION .)
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:18:47 AM Page 66 © 2005 Mitchell Repair Information Company, LLC.