Courtesy of MAZDA MOTORS CORP.
SENSOR OUTPUT VALUE INSPECTION
1. Turn the ignition switch off.
2. Connect the M-MDS to the DLC-2.
3. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
1. Select "DataLogger".
2. Select "Modules".
3. Select "ABS".
z
When using the PDS (Pocket PC)
1. Select "Module Tests".
2. Select "ABS".
3. Select "DataLogger".
Fig. 22: Connecting M-MDS To DLC-2
Courtesy of MAZDA MOTORS CORP.
4. Select the following PIDs using the M-MDS:
z
WSPD_LR
(LR ABS wheel-speed sensor)
z
WSPD_RR
(RR ABS wheel-speed sensor)
5. Start the engine and drive the vehicle.
6. Verify that the display of the M-MDS shows the same value as the speedometer.
z
If there is any malfunction, replace the rear ABS wheel-speed sensor.
REAR ABS WHEEL-SPEED SENSOR INSPECTION [AWD]
2008 Mazda CX-9 Grand Touring
2008 BRAKES Dynamic Stability Control/Roll Stability Control - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:40:24 AM
Page 22
© 2005 Mitchell Repair Information Company, LLC.
