1. Adjust clearance A by turning the adjusting bolt of the SST.
Clearance A 2.9 mm {0.11 in}
Fig. 22: Adjusting Clearance
Courtesy of MAZDA MOTORS CORP.
2. Crimp the wheel side small boot band using the
SST.
Verify that clearance B is within the specification.
z
If clearance B is more than the specification, reduce clearance A of the
SST
and crimp the boot
again.
z
If clearance B is less than the specification, replace the boot band, increase clearance A of the
SST,
and crimp the new boot.
Clearance B 2.4-2.8 mm {0.095-0.110 in}
Fig. 23: Crimping Wheel Boot Band
Courtesy of MAZDA MOTORS CORP.
3. Verify that the boot band does not protrude from the boot band installation area.
z
If it does, replace the boot band and repeat Steps 2 and 3.
4. Fill the boot with the repair kit grease.
5. Adjust clearance A by turning the adjusting bolt of the
SST.
Clearance A 3.2 mm {0.13 in}
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLES Drive Shaft - Mazda CX-9
Microsoft
Sunday, November 15, 2009 9:50:57 AM
Page 14
© 2005 Mitchell Repair Information Company, LLC.
