PID/DATA MONITOR DISPLAY
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
z
When using the IDS (laptop PC)
1. Select "DataLogger".
2. Select "Modules".
3. Select "RCM".
Fig. 5: Identifying DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
z
When using the PDS (Pocket PC)
1. Select "Module Tests".
2. Select "RCM".
3. Select "DataLogger".
3. Select the applicable PID from the PID table.
4. Verify the PID data according to the directions on the screen.
PID/DATA MONITOR TABLE
PID/DATA MONITOR CHART
NOTE:
z
The PID data screen function is used for monitoring the calculated
value of input/output signals in the module. Therefore, if the
monitored value of the output parts is not within the specification, it
is necessary to inspect the monitored value of input parts
corresponding to the applicable output part control. In addition,
because the system does not display an output part malfunction as
an abnormality in the monitored value, it is necessary to inspect the
output parts individually.
PID name
Unit/Condition
Operation Condition Terminal
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:18:46 AM
Page 12
© 2005 Mitchell Repair Information Company, LLC.
