Fig. 73: Identifying Activation Switch
Courtesy of MAZDA MOTORS CORP.
PRE-TENSIONER SEAT BELT
1. Remove the pre-tensioner seat belt.
(See
FRONT SEAT BELT REMOVAL/INSTALLATION
.)
2. Connect the
SST (Adapter harness)
to the pre-tensioner seat belt as shown in the figure.
Fig. 74: Connecting SST To Pre-Tensioner Seat Belt
Courtesy of MAZDA MOTORS CORP.
3. Put the pre-tensioner seat belt inside the tire and secure it to the tire by wrapping a wire (cross section of
1.25 mm
2
{0.002 in
2
} or more)
through the tire and the bolt installation holes
at least 4 times
.
WARNING:
z
If the pre-tensioner seat belt is not properly installed to the tire,
serious injury may occur when the pre-tensioner part is
operated (deployed). When installing the pre-tensioner seat belt
to the tire, make sure the pre-tensioner part is inside the tire.
Fig. 75: Placing Pre-Tensioner Seat Belt Inside Tire
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS Air Bag System - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:16:38 AM
Page 48
© 2005 Mitchell Repair Information Company, LLC.
