M-MDS CONNECTING PROCEDURE
1. Fully lower the door glass.
2. Connect the M-MDS to the DLC-2.
3. Pull out the M-MDS cable from the door glass opening and set the M-MDS outside the vehicle.
NO.1 ADDITIONAL KEY REGISTRATION PROCEDURE (USING TWO VALID KEYS)
Conditions
z
Have two or more valid keys.
M-MDS can be used to verify the number of key ID numbers registered to a
single vehicle.
z
Do not select screen menus of the M-MDS that are not indicated within the
procedures.
CAUTION:
z
Do not place the M-MDS in the vehicle while programming, otherwise
programming cannot be performed.
CAUTION:
z
Protect the cable and body contact area with a clean rag,
otherwise they could be damaged.
Fig. 99: Identifying DLC-2 Location
Courtesy of MAZDA MOTORS CORP.
NOTE:
z
A maximum of eight keys can be registered for any one vehicle. If key
registration is not successful and DTC 15 appears even though the
procedure was performed properly, use the PID/data monitor function
of the M-MDS and verify the number of keys that have been
registered.
z
If eight keys have already been registered, and it is necessary to
register other keys, the previously registered key ID numbers must
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:59 AM
Page 84
© 2005 Mitchell Repair Information Company, LLC.
