DTC B1048, B1925, B1933, B1935, B1938
DTC B1048, B1925, B1933, B1935, B1938 DETECTION CONDITION AND POSSIBLE CAUSE
DIAGNOSTIC PROCEDURE
{
Open circuit
z
Is the wiring harness normal?
DTC
B1048 Passenger-side air bag module (inflator No.1) and other air bag module circuits short
B1925 Passenger-side air bag module (inflator No.1) circuit short to power supply
B1933 Passenger-side air bag module (inflator No.1) circuit resistance high
B1935 Passenger-side air bag module (inflator No.1) circuit resistance low
B1938 Passenger-side air bag module (inflator No.1) circuit short to body ground
DETECTION
CONDITION
z
Resistance other than
1.0-9.7
ohms detected in passenger-side air bag module circuit
(inflator No.1)
z
Malfunction in wiring harness between passenger-side air bag module (inflator No.1)
and SAS control module
WARNING:
z
Detection conditions are for understanding the DTC outline before performing an
inspection. Performing an inspection according to only the detection conditions
may cause injury due to an operating error, or damage the system. When
performing an inspection, always follow the inspection procedure.
POSSIBLE
CAUSE
z
Open or short circuit in wiring harness between passenger-side air bag module
(inflator No.1) and SAS control module
z
Passenger-side air bag module malfunction
z
SAS control module malfunction
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:18:46 AM
Page 25
© 2005 Mitchell Repair Information Company, LLC.
