10. Repeat Steps 5-8 using key 3 instead of key 1.
11. If an additional key is to be programmed, repeat Steps 2-10 with the additional key as key 4.
12. Verify that the all keys can start the engine for
5 s or more
after the procedure.
NO. 2 KEY ADDITIONAL PROGRAMMING PROCEDURE (USING THE M-MDS)
Condition
z
There is only one valid key. Or, there is no valid key but there is a card key that can start the engine.
Procedure (If one key is to be programmed)
Fig. 87: Key Additional Programming Procedure (If One Key Is To Be Programmed)
Courtesy of MAZDA MOTORS CORP.
1. Prepare key 2 for programming.
2. Start the engine using a valid key 1 or card key 1.
NOTE:
z
A maximum of eight keys can be programmed for one vehicle. If key
registration is not successful and DTC 15 appears even though the
procedure was performed properly, use the PID/data monitor function
of the M-MDS and verify the number of keys that have been
programmed.
z
If eight keys have already been programmed, and it is necessary to
program other keys, the previously programmed key ID numbers
must first be cleared. To clear the key ID number, refer to "
CLEARING CARD KEY [ADVANCED KEYLESS SYSTEM]".
CAUTION:
z
Do not place the card key in the vehicle when starting the
engine with the valid key, otherwise programming cannot be
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:47:58 AM
Page 62
© 2005 Mitchell Repair Information Company, LLC.
