5. Dry the repaired part according to the following procedure.
z
When the room temperature is
25°C {77°F}
, leave it as it is for
24 h.
z
When a hot air blower is used, dry with the
150°C {302°F}
air for
30 min.
Fig. 61: Attaching Tape To Both Sides Of Filament
Courtesy of MAZDA MOTORS CORP.
POWER OUTER MIRROR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the inner garnish. (See
INNER GARNISH REMOVAL/INSTALLATION
.)
3. Remove the front door trim. (See
FRONT DOOR TRIM REMOVAL/INSTALLATION
.)
4. Disconnect the power outer mirror connector.
5. Remove the bolts.
6. Push the power outer mirror against the vehicle and detach the tab while lifting the mirror up to remove.
7. Install in the reverse order of removal.
CAUTION:
z
Do not operate the rear window defroster until the paint is
completely dry. It may cause other malfunctions if it is used
before the paint is dry.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Glass/Windows/Mirrors - Mazda CX-9
Microsoft
Sunday, November 15, 2009 10:36:17 AM
Page 43
© 2005 Mitchell Repair Information Company, LLC.
