Head-up display for
G
lobal
P
ositioning
S
ystem
GPS HUD
QUICK START
GUIDE
Model: HUDGPS1
Features and Specifications
●
Vehicle driving speed display
●
Over speed warning
●
Speed warning alarm Mute
●
Speed unit km/h and Mile/h switch
●
Speed digit display : Green color
●
Working Voltage: 9~ 28 Vdc
●
Power Consumption: 100 mA (typ.)
●
Operating Temp.: -20C~85
℃
Contents:
●
GPS HUD unit
●
Power Connector
●
Projection Sticker Tape
●
Base unit bracket
INSTALL THE HUD UNIT
Fig.1
Fig.2
GPS HUD
Take the power Cigar-plug connector plug
into the power Cigar-outlet of your vehicle
and other side to HUD unit.
Push Red button at power connector to get
the IGN Voltage and then switch on the HUD
device.
Power Connector
Clean area of windscreen where
reflective film is to be positioned.
Spread some soap water onto
reflective film after peeling & affix
onto windscreen, and remove
excessive water.
Locate a suitable surface to position the
HUD unit on to the dashboard.
Adjust the HUD angle to obtain the
optimum viewing position. The angle
stand on the HUD is removable and can
be moved to
accommodate various
location on the dashboard.
INSTALLING THE GPS HUD
