background image

SIREN MOUNTING:

1.  Find a suitable spot to mount the siren in the engine

compartment (firewall, sidewall, etc.).

2.  Using siren bracket as a template, drill (2) 1/8" diameter

holes in mounting surface.

Note:

 If mounting on the firewall, make certain there is no

interference on the other side of the firewall.

3.  Secure bracket using screws provided with kit.
4.  Secure siren to the bracket using bolts and lock washers

provided.

WARNING -

 Open end of siren must point downward to

prevent water collection in horn end of siren.

WIRING:

RED WIRE -

 Splice to +12 VDC battery source lead of existing

alarm.

BLACK WIRE -

 Splice to chassis ground lead of existing

alarm.

WHITE w/ BLACK STRIPE WIRE -

 Connect  to the positive

siren output from the alarm module.

Printed in U. S. A.

Form No. 128-4503

INSTALLATION GUIDE FOR:

Battery Back-Up

RED WIRE - SPLICE TO +12VDC BATTERY
SOURCE LEAD TO EXISTING ALARM.

WHITE w/BLACK STRIPE - CONNECT TO
THE POSITIVE SIREN OUTPUT FROM THE
ALARM MODULE.

BACK-UP SIREN

NOTE: BEFORE MAKING
CONNECTION,

MAKE

SURE KEY IS IN THE "OFF"
POSITION AS SHOWN.

NOTE : MAKE SPLICE CONNECTIONS AS CLOSE TO

EXISTING ALARM AS POSSIBLE.

AA-9103N

BLACKWIRE-SPLICEINTOCHAS-
SIS GROUND LEAD OF
EXISTING ALARM.

OFF

ON

Отзывы: