D3324Rev2
www.eibach.com
Page
1
Contents
Description Part
Number
Qty
Damper Assy.
82110.8003.1
1
External Snap Ring
84-1804
1
Bump Stop Cap
8000795
1
Rod
Wiper
8000796
1
Bushing
90389-A0001
1
Lower Stem Washer
84-1335
1
Lower Stem Bushing
84-1333
1
Upper Stem Bushing
84-1331
1
Cupped
Washer 84-1334
1
Nut,
Nylock
M12-1.25
H63075400 1
Spring
Perch
28-3016
1
Information
Kit EPAK
1
Installation
Instructions
82110.8003INST
1
NOTES:
Read All Instructions Before Beginning Installation
1. Park vehicle on level surface and set emergency brake. Raise and support the vehicle with safety stands.
Refer to factory manual for proper location of safety stands.
2. Power washing your chassis will make the installation cleaner.
NOTE
: Never work on or under a vehicle unless it is properly supported by safety stands.
3. Loosen and remove the OE shock per the factory recommended removal procedure.
4. Installation of the Eibach Pro Damper shock should be done in the reverse order of removal.
Installation Instructions
Pro-Damper
– # E60-82-007-02-10
Eibach Springs, Inc.
264 Mariah Circle
Corona, California 92879-1751
USA
Tech Support 800-222-8811 Ext 114
