Avaya Definity SI, Руководство по обслуживанию, Страница: 851 / 2968

ANL-16-L (16-Port Neon Analog Line)
Issue 4 May 2002 10-65 555-233-123
b. This is a software audit error that does not indicate any hardware
malfunction. Run Short Test Sequence and investigate associated errors (if
any).
c. This error type indicates that the circuit pack has been removed or has
been insane for more than 11 minutes. To clear the error, reinsert or
replace the circuit pack.
d. This is an in-line error and can only be resolved over time. This error
indicates that ringing voltage is absent. If only one Analog circuit pack in
the system has this problem, then replace the circuit pack. If only Analog
circuit packs on a particular carrier have this error, then the ringing
generator may not be connected to this carrier. If Analog circuit packs on
many carriers have this error, then it is probably a problem with the ringing
generator.
e. Test #48 may cause some terminal equipment to ring briefly during daily
maintenance. If this ringing is disturbing the customer or the terminal
equipment, it should be disabled using the change station <extension>
command. However, on some releases of the software, this action disables
Tests #6, #7, #161, and #35 as well as Test #48.
System Technician-Demanded Tests: Descriptions
and Error Codes
Always investigate tests in the order presented in the following table when
inspecting errors in the system. By clearing error codes associated with the
Battery Feed Test, for example, you may also clear errors generated from other
tests in the testing sequence.
Order of Investigation
Short Test
Sequence
Long Test
Sequence D/
ND
1
1 D = Destructive; ND = Nondestructive
Battery Feed Test (#35) X X ND
Station Present Test (#48) X X ND
Loop Around Test (#161) X ND
Conference Test (#7) X ND
NPE Crosstalk Test (#6) X ND
Station Status and Translation Audits and Updates Test (#36) X X ND