Avaya Definity SI, Руководство по обслуживанию, Страница: 830 / 2968

Maintenance Object Repair Procedures
555-233-123 10-44 Issue 4 May 2002
ANL-24-L (24-Port Analog Line)
The 24-Port Analog Line circuit pack (TN793) provides 24 ports for voice
terminals and supports both on-premises and off-premises analog voice
terminals.
No maintenance of the terminal connected to the 24-Port Neon Analog Line circuit
pack is performed, except to determine whether or not the terminal is connected.
Failures of the neon message waiting lamp power and the common ringing
application circuitry are reported as part of common port circuit pack errors. See
errors 1281 and 1793 in the “XXX-BD (Common Port Circuit Pack)” section.
NOTE:
This analog line circuit pack supports analog data modules. When assigned,
analog data modules provide access to the NetPkt (TN2401/TN794) data
ports. To activate an analog data module you must assign the port location
on the data form and connect a modem to the port. (The analog data
module may be used for connection to a CDR output or other adjuncts as
needed.) These ports are tested the same as all other analog ports on the
circuit pack.
Ringing Caused by Maintenance Testing
Test #48 may cause some terminal equipment to ring briefly during daily
maintenance. If this ringing is disturbing the customer or the terminal equipment, it
should be disabled in the
Tests
field of the change station extension form. Be
aware that this action also disables Tests #6, 7, 161, and 35.
MO Name (in
Alarm Log)
Alarm Level
Initial Command to
Run
1
1 Where P is the port network number (1 for PPN); C is the carrier designation (for
example, A, B, or C); SS is the address of the slot in the carrier where the circuit pack is
located (for example, 01, 02, etc.); and pp is the 2-digit port number (for example, 01).
Full Name of MO
ANL-24-L MIN test port PCSSpp l 24-Port Analog Line
ANL-24-L WRN test port PCSSpp sh 24-Port Analog Line