Avaya Definity SI, Руководство по обслуживанию, Страница: 2394 / 2968

Maintenance Object Repair Procedures
555-233-123 10-1608 Issue 4 May 2002
Link Retry Test (#215)
The Link Retry Test sends a message to the SYS-PRNT software process either
(1) to make a data call to the extension to which the SYS-PRNT output device
connects OR (2) to open the EIA port to the SYS-PRNT output device. If the
System Printer Link is already up, this test passes without making a data call or
opening the EIA port.
Table 10-594. TEST #215 Link Retry Test
Error
Code Test
Result Description/Recommendation
10, 20 ABORT Internal system error
1. Retry the command at 1-minute intervals a maximum of 2
times.
30 ABORT Internal system error
1. Refer to the ‘‘Procedures for Restoring the System Printer
Link’’ section for recommended maintenance strategy.
1010 ABORT The System Printer Link has been busied out.
1. Enter release sp-link to release the System Printer Link
from the busyout state.
2. Reissue the test sp-link long command to execute the test.
FAIL The System Printer Link CANNOT be established.
1. Refer to the ‘‘Procedures for Restoring the System Printer
Link’’ section for recommended maintenance strategy.
PASS The System Printer Link is up.
Continued on next page