Avaya Definity SI, Руководство по обслуживанию, Страница: 2407 / 2968

TAPE (Tape Unit) [G3iV1.1-286]
Issue 4 May 2002 10-1621 555-233-123
Tape Diagnostic Test (#66)
This test activates the diagnostic tests built into the Maintenance/Tape Processor
(MTP) firmware on the TN773 Processor circuit pack. The test verifies the basic
read/write capability of the tape drive and tape cartridge. Also, the test performs
controller/MTP hardware diagnostics.
The test reads from the tape and performs write verification testing by writing data
into a maintenance block and reading it back. It also performs a tape drive head
step check by advancing the tape drive head through all even streams on the tape
(streams 0 through 18) to make sure the head is operational.
The test does not test every data block on the tape.
Table 10-596. TEST #65 Tape Read/Write Test
Error
Code Test
Result Description/Recommendation
1029 to
1030
and
2011 to
2051 ABORT Refer to the STBY-SPE (Standby SPE) Maintenance
documentation for a description of these error codes.
9000’s ABORT
or FAIL Refer to Table A in ‘‘Tape Unit Aux Data/Error Codes Tables’’
and follow the recommended repair strategy for specific Aux
Data.
Any
Others ABORT
or FAIL Refer to Table B in ‘‘Tape Unit Aux Data/Error Codes Tables’’
and follow the recommended repair strategy for specific Aux
Data.
PASS All tape hardware is in good working order. Passing this test
does not guarantee that every single data block on the tape
cartridge can be read or written to.
Table 10-597. TEST #66 Tape Diagnostic Test
Error
Code Test
Result Description/Recommendation
1029 to
2051 ABORT Refer to the STBY-SPE (Standby SPE) Maintenance
documentation for a description of these error codes.
9000’s ABORT or
FAIL Refer to Table A in ‘‘Tape Unit Aux Data/Error Codes
Tables’’ and follow the recommended repair strategy for
specific Aux Data.
Continued on next page