Avaya Definity SI, Руководство по обслуживанию, Страница: 264 / 2968

Maintenance Commands and Trouble-Clearing Aids
555-233-123 8-14 Issue 4 May 2002
For information on PMS, see the description of the ‘‘status pms-link’’ command.
Feature Interactions
Maintenance of a particular component on a link sometimes interferes with the
maintenance of the link itself. For example, maintenance can put a link
component in a busy state causing link set-up to fail. Frequent attempts at
re-setup of a link may delay the recovery of a faulty component, due to the
maintenance test of a component only taking place when the component is idle.
Therefore, disable the attempted re-setup of a link with the busyout command and
the link remains intact. If the link is already down, the busyout command stops
periodic re-setup attempts on the link.
Output
The following example is a display of the busyout pms-link command.
Field descriptions
Action/
Object
Qualifier Qualifier Description Logins Defaults
Feature
Interactions
busyout
pms-link Example:
busyout pms-link init
inads
craft none See below
Port
Always blank
Maintenance Name
Name of maintenance object: PMS-LINK
Alt. Name
Not applicable.
Result
Test result: Pass, Abort, Fail
Error Code
Numeric code explaining why the release failed or aborted.
Refer to the detailed list of codes by test number for each MO.
busyout pms-link SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
PMS-LINK PASS
Command Successfully Completed