Avaya Definity SI, Руководство по обслуживанию, Страница: 1832 / 2968

Maintenance Object Repair Procedures
555-233-123 10-1046 Issue 4 May 2002
d. Try pinging another device on the same subnet.
e. Try pinging the gateway to the rest of the network from the subnet.
f. Try pinging a device not on the local subnet but on the network or
another subnet.
5. When finished, at the command prompt type exit and press
Enter
.
Internal connections to the LAN
Test the internal connections to the LAN by pinging the
■
local host
■
internal IP trunk server
■
another device connected to the network:
1. Click Start in Windows (lower lefthand corner), then select Programs, then
Command Prompt.
This starts a DOS command line session.
2. At the command prompt, type ping 127.0.0.1 (the local host default
address) and press
Enter
.
If configured correctly, the system displays:
Reply from nnn.nn.nn.nn: bytes=32 time <##ms TTL=###
If there is no reply:
a. Check that the internal cables on the TN802 circuit pack (Notes 4
and 6 in Figure 10-67 on page 10-1049 ) have not worked loose.
b. Otherwise, replace the circuit pack.
3. At the command prompt, type ping 10.32.64.97 (the internal IP trunk
server address) and press
Enter
.
■
If configured correctly, the system displays:
Reply from nnn.nn.nn.nn: bytes=32 time <##ms
TTL=###
■
If there is no reply:
— Check that the internal cables on the TN802 circuit pack
(Notes 4 and 6 in Figure 10-67 on page 10-1049 ) are not
loose.
— Replace the circuit pack.