Avaya Definity SI, Руководство по обслуживанию, Страница: 397 / 2968

list config software-version
Issue 4 May 2002 8-147 555-233-123
Some things to note when using list configuration software-version are:
1. For simplex systems, the fields under column “SPE_B are blank and the
optional Long qualifier is not part of the command line.
2. For a High or Critical Reliability System, the fields under the column of the
standby SPE are blank if the optional long modifier is not given.
3. If the tape or memory card contains a core dump file system, fields for the
tape or memory card contain coredump. This is because in a coredump
file system all files other than the coredump file are marked as invalid.
4. If MSS cannot be read when the command is issued, the string no tape or
none for no memory card is in the appropriate fields on the screen. This
does not mean that the system thinks there is no tape, only that the
software was unable to read the appropriate information when requested.
5. If the command is issued using the memory-resident option, the fields on
the form associated with the tape contain n/a.
6. When the status of the update field appears, the following strings are used
(for more information refer to step c of this list):
■
none in memory
— no update has been applied to memory.
■
immediate partially applied
— an error condition that is
valid only when an update that is in the process of being applied
fails. Check the validity of the update file that was sent, and then
check the hardware error log for tape errors, and follow standard
maintenance procedures.
■
all immediate applied deferred pending
— a valid
update file was received by the switch, and all the immediate
sub-patches were applied. This state indicates that there are
deferred sub-patches in the update file, and a system reset of the
proper level has not occurred since the update file was received.
Announcement Date
Section Displays information related to the announcement files.
Information is displayed for the memory resident copy as
well as the corresponding MSS file
Mem Card Resident
The last date and time that announcement data was saved
to the memory card. If the memory card is not installed, this
field displays
no card .
PKT-CTRL FW
Version Section displays information related to the Packet Control firmware.
Information is displayed for the Packet Control circuit pack
resident copy as well as the corresponding tape file
Pkt-ctrl Resident
The version of firmware in the Packet Control circuit pack.
Flash Resident
The version of the Packet Control circuit pack residing on
the system flash memory.