Avaya Definity SI, Руководство по обслуживанию, Страница: 617 / 2968

status ip-board
Issue 4 May 2002 8-367 555-233-123
status ip-board
status ip-board CCcss
The status ip-board command has the same syntax and output as the status
c-lan-ip command except the list of allowed boards is larger. The command can
be run on either a TN799 or a TN2302.
NOTE:
This SAT command cannot be run on the other IP-capable DEFINITY board,
the MAPD, although somewhat similar commands can be carried out
through the MAPD’s operating system.
The command status ip-board CCcss returns the data in the first two columns of
the following table. The form also shows the time of the last port reset, the last
hour start time and end time for the error counter statistics.
Table 8-15. status c-lan-ip CCcss
Field Name on
switch output
output type MIB data Description
Incoming data-
gram header
errors Counter Long ipInHdrErrors The number of input datagrams dis-
carded due to errors in their IP head-
ers, including bad checksums,
version number mismatch, other for-
mat errors, time-to-live exceeded,
errors discovered in processing their
IP options, etc.
Outgoing data-
grams with no
route available Counter Long ipOutNoRoutes The number of IP datagrams dis-
carded because no route could be
found to transmit them to their desti-
nation. Note that this counter
includes any packets counted in
ipForwDatagrams which meet this
`no-route’ criterion. Note that this
includes any datagrams which a host
cannot route because all of its default
gateways are down.
Incoming data-
grams received Counter Long ipInReceives The total number of input datagrams
received from interfaces, including
those received in error.
Continued on next page