Avaya Definity SI, Руководство по обслуживанию, Страница: 1981 / 2968

PDMODULE, TDMODULE (Data Module)
Issue 4 May 2002 10-1195 555-233-123
7 FAIL Conference test failed on the primary information channel. In
some cases, user may not notice disruption in service. In
extreme cases, conferencing feature may not work at all.
14 FAIL The primary information channel is not transmitting properly.
User impact may range from noticing nothing to not being
able to use this port.
15 FAIL The control channel between the processor and Digital Line
circuit pack is not transmitting properly. This can cause a wide
range of effects. The user may notice nothing or the port may
be totally unusable. This could also disrupt other users.
1. Run circuit pack tests to check the Tone Generator and
the Tone Detector circuit packs using the test board
UUCSS short command.
2. Resolve any problems that are detected on the Tone
Generator circuit pack or Tone Detector circuit pack.
3. If the Tone Generator and Tone Detector circuit packs are
functioning properly, and the test still fails, replace the
Digital Line circuit pack.
16 FAIL The secondary information is not transmitting properly. This
can cause a wide range of effects. The user may notice
nothing or the port may be totally unusable.
1. To be sure that this is not an intermittent problem, repeat
this test up to a maximum of 10 times to make sure it
continues to pass.
2. If complaints still exist (poor data transmission), examine
the data module, connections, and wiring.
PASS Information and Control Channel Local Loop Test passed. All
channels are transmitting properly.
Table 10-446. TEST #13 Information and Control Channel Local Loop Test — Continued
Error
Code
Test
Result Description/Recommendation
Continued on next page