Avaya Definity SI, Руководство по обслуживанию, Страница: 2322 / 2968

Maintenance Object Repair Procedures
555-233-123 10-1536 Issue 4 May 2002
93 Switch Control Reset Test (SW-CTL) X
325 Destructive EPN Maintenance Board Interface Test
(SW-CTL) X
95 Time-of-Day Clock Test (SW-CTL) X X
92 Control Channel Interface Test (SW-CTL) X X
94 Control Channel Transmission Test (SW-CTL) X X
324 EPN Maintenance Board Interface Test (SW-CTL) X X
77 Processor Software Initiated Interrupt Test (PROCR) X X
80 Processor ROM Checksum Test (PROCR) X X
82 Processor Non-Maskable Interrupt Test (PROCR) X X
83 Processor Sanity Timer Test (PROCR) X
102 MTP Outpulse Relay Test (PR-MAINT) X X
103 MTP Analog Loop Around Test (PR-MAINT) X X
106 MTP Sanity Handshake Test (PR-MAINT) X X
228 MTP Manager I Channel Loop Around Test
(PR-MAINT) X X
229 MTP Auxiliary Channel Loop Around Test
(PR-MAINT) X X
101 MTP Reset Test (PR-MAINT) X
104 MTP Dual Port RAM Test (PR-MAINT) X
The following Memory Card tests are executed:
695 Cartridge Insertion Test (CARD-MEM) X X
696 Cartridge Format and Read Test (CARD-MEM) X X
697 Cartridge Match Test (CARD-MEM) X X
698 Cartridge Write-Protected Test (CARD-MEM) X X
699 Cartridge Directory Sanity Check and Recovery Test
(CARD-MEM) X X
694 Cartridge Translation Data Integrity Test
(CARD-MEM) X
693 Cartridge Erase/Write/Read Test (CARD-MEM) X
703 Flash Data Consistency Test (FL-DATA) X
For each Processor Interface circuit pack in the Standby SPE, the following PI-BD tests are
run:
52 Control Channel Test (PI-BD) X X
50 NPE Audit (PI-BD) X
423 Standby PI Board Test (PI-BD) X X
Table 10-577. Test Sequence of Test SPE-Standby — Continued
Test
Number Name of Test and Associated MO
Short Test
Sequence
Long Test
Sequence
Continued on next page