Avaya Definity SI, Руководство по обслуживанию, Страница: 568 / 2968

Maintenance Commands and Trouble-Clearing Aids
555-233-123 8-318 Issue 4 May 2002
status card-mem
Memory cards are portable, compact memory cards that contain banks of flash
EPROM chips. Non-volatile memory cards are eraseable and randomly
programmed with user data. Main memory stores system software in its “flash”
section. Memory cards that save translations do not contain copies of the system
software. During system reboot or system power down conditions, in-core system
maintenance hardware error logs temporarily save in memory cards before the
system goes down. Then, the error logs file reads back when the system restarts.
The Hard Patch feature also uses the memory card as temporary storage when
LMM applies patched files to the system software.
The status card-mem command displays the following memory card information
located at active or standby SPEs:
■
Is a valid memory card in place?
■
Is the memory card write-protected?
NOTE:
Beginning with Release 9, the memory card has no write protect
switch and no equivalent software mechanism.
■
What is the capacity of the inserted memory card?
■
What kind of system configuration - small or medium?
■
What is the number of pulses counted in the last erase operation?
■
What is the percentage of translation storage space used?
■
What are the names of files stored in the memory card, and what is date
and time (if available) when it was saved?
Action/
Object
Qualifier Qualifier Description Logins Default
Feature
Interactions
status
card-mem location
print
Physical carrier position where the memory
card resides in a High or Critical Reliability
System
Simplex switch configurations= not required.
Duplex switch configuration= “A” for control
carrier A in Processor Port Network (PPN),
or “B” for control carrier B in PPN.
Report sent to printer.
Examples:
status card-mem
status card-mem A
status card-mem b print
init
inads
craft
cust
rcust
nms
bcms
browse none see below