Avaya Definity SI, Руководство по обслуживанию, Страница: 179 / 2968

ATM Tips
Issue 4 May 2002 5-75 555-233-123
b. If the customer is providing an Ethernet connection to the A500,
does the
Ethernet IP mask
field have the customer-provided
mask (typically something like
255.255.255.0
, although other
values are valid), as configured with admin address?
c. If the customer is providing an Ethernet connection to the A500,
does the
IP default router
field have the customer-provided
Internet address, as configured using the admin gateway
command?
d. If the customer is providing an Ethernet connection to the A500 and
intends to upload to or download from a TFTP server, does the
TFTP
server
field have the customer-provided Internet address, as
configured using tftp setserver?
e. Does the
ATM address
field have the customer- or Avaya-provided
network prefix (the first thirteen bytes and set by using modify
atmprefix)?
DEFINITY Administration
Is ATM PNC administered correctly?
1. Enter list atm pnc on the DEFINITY SAT. The cabinet, carrier and slot
positions of each administered TN230X board display as shown in Screen
5-9 . Ensure that each board’s physical location matches the display.
Screen 5-9. Screen output for list atm pnc command
Alternatively, use list configuration UUC (non-control cabinets) to confirm
the PPN and EPN board locations and correct insertion.
2. Enter status pnc at the DEFINITY SAT to see which TN230X board is
active in a duplicated system and how many alarms (if any) of each
severity level have been logged for the board.
Screen 5-10 on page 5-76 shows the output from this command.
list atm pnc Page 1 SPE A
ATM PNC
PNC A-PNC B-PNC
Connection # LOC LOC
1 01B02
2 02A01