Avaya Definity SI, Руководство по обслуживанию, Страница: 2090 / 2968

Maintenance Object Repair Procedures
555-233-123 10-1304 Issue 4 May 2002
1339 ABORT The test could not run on the standby Packet Interface because
the standby SPE is unavailable.
1. Refer to the STBY-SPE maintenance documentation for
information on why a standby SPE may be unavailable and
what repair actions should be taken. The status system
1screen displays the status of the standby SPE. Unavailability
of the standby SPE may be caused by a variety of reasons
such as the setting the SPE-SELECT switches on the
DUPINT circuit packs to the position of the active SPE, a
failure of the DUPINT circuit pack, or loss of power on the
standby SPE. The
SPE Select Switch
field on the status
syst 1screen displays
spe a
or
spe b
if the SPE-SELECT
switches are in the a or b position, respectively.
2000 ABORT Response to the test request was not received within the
allowable time period.
1. Retry the command at 1-minute intervals, a maximum of 3
times.
2500 ABORT Internal system error
1. Retry the command.
NO
BOARD The Packet Interface is not detected as being physically present.
1. Reboot the system, then retry the command. If the NO
BOARD indication persists, replace the TN2401/TN794
NetPkt circuit pack.
Table 10-484. TEST #884 Memory Checksum Test — Continued
Error
Code Test
Result Description/Recommendation
Continued on next page