Avaya Definity SI, Руководство по обслуживанию, Страница: 1091 / 2968

BRI-SET, ASAI-ADJ, BRI-DAT
Issue 4 May 2002 10-305 555-233-123
System Technician-Demanded Tests: Descriptions
and Error Codes
When inspecting errors in the system and deciding which ones to address, always
investigate errors associated with the circuit pack and port first. Clearing these
error codes first may also clear errors generated against the endpoint. When all
circuit pack and port errors have been cleared, and errors still exist against the
endpoint, always investigate errors in the order they are presented in the table
below. By clearing error codes associated with the Signaling Link Status Test, for
example, you may also clear errors generated from other tests in the testing
sequence.
65 Bearer Service
Not Implemented Requested service not implemented in switch or
endpoint.
69 Requested
Facility Not
Implemented Requested service not supported in switch or
endpoint.
1. Consult switch and endpoint documentation
to determine service support.
2. If Step 1 does not resolve the problem,
escalate to the next tier.
ADJUNCT/SWITCH ERROR CONDITIONS
81 Invalid CRV An invalid CRV was sent by the adjunct.
1. This may indicate a CRV inconsistency
between the switch and the adjunct. See the
CallVisor protocol reference manual.
2. If step 1 does not resolve the problem,
escalate to the next tier.
Table 10-120. ISDN-BRI Cause Values — Continued
Code Explanation Recommendation
Continued on next page