Avaya Definity SI, Руководство по обслуживанию, Страница: 2741 / 2968

VAL-BD (Voice Announcements over LAN Circuit Pack)
Issue 4 May 2002 10-1955 555-233-123
2012 ABORT Could not allocate the necessary system resources to run test.
2100 ABORT Internal system error.
Retry the command at 1-minute intervals, up to 5 times.
If the problem persists, escalate the problem.
1
2
FAIL
FAIL
The buffer level is nearly exhausted.
The VAL is congested, and no buffers are available.
Retry command at 1-minute intervals, up to 5 times.
If command continues to fail, examine the VAL port
measurements to determine which ports are heavily utilized and
the processor occupancy of the circuit pack.
A Low processor occupancy when VAL is congested indicates
circuit pack failure.
If the problem persists, reset the circuit pack (reset board
UUCSS).
If congestion recurs, replace the circuit pack.
High processor occupancy indicates the VAL is congested due to
traffic load.
To relieve congestion in the short term, selectively busyout ports
(busyout port UUCSSpp) on the VAL circuit pack.
To achieve a more permanent resolution, it could be necessary
reassign announcements to other integrated announcement
circuit packs.
Consider replacing affected VAL ports with new ports.
3 FAIL The VAL circuit pack is not operating normally and is congested.
PASS Hardware setting and attached cable type match VAL circuit pack
administration. The circuit pack detects no errors.
Table 10-699. TEST #600 Congestion Query Test — Continued
Error
Code Test
Result
Description/Recommendation
Continued on next page