manualshive.com logo in svg

NXP Semiconductors MPC5644A, Reference Manual, Page: 756 / 1735

Share
Download
NXP Semiconductors MPC5644A Reference Manual Download Page 756

Enhanced Time Processing Unit (eTPU2)

MPC5644A Microcontroller Reference Manual, Rev. 6

756

Freescale Semiconductor

 

•

New Watchdog mechanism kills threads over a programmable timeout.

•

New counter allows microengine load information collection for performance analysis

•

Channels 1 and 2 (besides channel 0) can now be selected to control the EAC.

•

Timebase prescalers are now reset when the GTBE input is negated, guaranteeing synchronization 
with eMIOS in all cases.

•

New MISC flag indicates when an SCM signature calculation round is completed. This allows 
measuring of the average MISC scan period in a real application situation.

•

New channel TCCEA flag allows continuous capture even after TDLA is set, making it fully 
compatible with TPU behavior.

•

New branch condition PRSS tells the pin state at the time when a channel (match or transition) 
service request occurred.

•

MRLEA/B can now be negated independently by microcode.

•

New engine Relative address mode allows a function to access SDM address space common to one 
engine, but distinct between engines.

•

Error Correction support for Code (SCM) and Data (SDM) memories (available on selected 
MCUs).

•

All changes above are upward compatible with the classic eTPU, so that legacy object code (both 
Host and microcode) runs on eTPU+ and eTPU2 without modification.

24.2.3

Modes of operation

The eTPU2 is capable of working in the following modes:

•

User Configuration Mode

User has the ability to program the eTPU Cores with User Time Functions, having access to the 
Shared Code Memory (SCM).

•

User Mode

User does not access the eTPU Shared Code Memory:

— Use of predefined eTPU Functions

— No need for eTPU Core programming ability

•

Debug Mode

User debugs eTPU code, accessing special Trace/Debug features via Nexus interface:

— Hardware breakpoint/watchpoint setting

— Access to internal registers

— Single-step execution

— Forced instruction execution

— Software breakpoint insertion and removal.

•

Module Disable Mode

eTPU engine clocks are stopped through a register write to ETPU_ECR bit MDIS, saving power. 
Input sampling stops. eTPU engines can be in Module Disable Mode independently. Module 
Disable Mode stops only the engine clock, so that the Shared BIU, and Global Channel registers 

Summary of Contents for MPC5644A








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments