NXP Semiconductors MPC5644A, Reference Manual, Page: 442 / 1735

System Integration Unit (SIU)
MPC5644A Microcontroller Reference Manual, Rev. 6
442 Freescale Semiconductor
16.6.15.51 Pad Configuration Register 85 (SIU_PCR85)
Figure 16-73. Pad Configuration Register (SIU_PCR85)
16.6.15.52 Pad Configuration Register 86 (SIU_PCR86)
Figure 16-74. Pad Configuration Register (SIU_PCR86)
S0xEA
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
R
0 0 0 PA OBE
1
1
When configured as GPO, the OBE bit should be set to one.
IBE
2
2
When configured as CAN_B_TX, DSPI_C_PCS[3], SCI_C_TX or GPO, the IBE bit may be set to one to reflect the
pin state in the corresponding GPDI register. Setting the IBE bit to zero reduces power consumption. When
configured as GPI, the IBE bit should be set to one.
0 0 ODE HYS SRC WPE WPS
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1
= Unimplemented or Reserved
Table 16-76. SIU_PCR85 PA values
Signal Name Module Description I/O
1,2
1
In cases where an I/O function can be either an input or an output, I/O direction is specified using the IBE and OBE
bits. Set IBE = 1 for input or OBE = 1 for output.
2
For I/O functions that change direction dynamically, such as the external data bus, switching between input and
output is handled internally and the IBE and OBE bits are ignored.
PA value
Primary CAN_B_TX FlexCAN FlexCAN transmit O 0b001
ALT1 DSPI_C_PCS[3] DSPI Chip select O 0b010
ALT2 SCI_C_TX eSCI eSCI transmit O 0b100
GPIO GPIO[85] SIU GPIO I/O 0b000
S0xEC
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
R
0 0 0 PA OBE
1
1
When configured as CAN_B_RX or SCI_C_RX, the OBE bit has no effect. When configured as GPO, the OBE bit
should be set to one.
IBE
2
2
When configured as DSPI_C_PCS[4] or GPO, the IBE bit may be set to one to reflect the pin state in the
corresponding GPDI register. Setting the IBE bit to zero reduces power consumption. When configured as GPI, the
IBE bit should be set to one.
0 0 ODE HYS SRC WPE WPS
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1
= Unimplemented or Reserved