NXP Semiconductors MPC5644A, Reference Manual, Page: 1359 / 1735

Enhanced Serial Communication Interface (ESCI)
MPC5644A Microcontroller Reference Manual, Rev. 6
Freescale Semiconductor 1359
Figure 31-21. SCI Break Character Formats
31.4.2.3 Idle character formats
An idle character is a sequence of bits with the value 1. The supported idle character formats are specified
in
Table 31-21 . The preamble has the same structure and content as an idle character.
The structure and content of the idle characters is shown in Figure 31-22 .
Figure 31-22. Idle Character Formats
31.4.3 Baud rate and clock generation
A 13-bit modulus counter in the baud rate generator derives the baud rate for both the receiver and the
transmitter. The value written to the SBR field in the
Baud Rate Register (eSCI_BRR) determines the
module clock divisor. The baud rate clock is synchronized with the bus clock and drives the receiver. The
baud rate clock divided by 16 drives the transmitter. The receiver has an acquisition rate of 16 samples per
bit time.
Table 31-21. Supported Idle Character Formats
Control
Idle Character Length
eSCI_CR3[M2] eSCI_CR1[M]
Idle Characters (see Figure 31-22 )
0 0 10
0 1 11
1 0 12
1 1 16
BIT0
START
BIT
BIT1 BIT2 BIT3 BIT4 BIT5 BIT6 BIT7 BIT8
BIT0
START
BIT
BIT1 BIT2 BIT3 BIT4 BIT5 BIT6 BIT7 BIT8 BIT9 BIT10 BIT11
BIT0
START
BIT
BIT1 BIT2 BIT3 BIT4 BIT5 BIT6 BIT7 BIT8 BIT9
BIT0
START
BIT
BIT1 BIT2 BIT3 BIT4 BIT5 BIT6 BIT7 BIT8 BIT9 BIT10 BIT11 BIT12
BIT0 BIT1 BIT2 BIT3 BIT4 BIT5 BIT6 BIT7 BIT8 BIT9
BIT0 BIT1 BIT2 BIT3 BIT4 BIT5 BIT6 BIT7 BIT8 BIT10 BIT9
BIT0 BIT1 BIT2 BIT3 BIT4 BIT5 BIT6 BIT7 BIT8 BIT10 BIT9 BIT11
BIT0 BIT1 BIT2 BIT3 BIT4 BIT5 BIT6 BIT7 BIT8 BIT10 BIT9 BIT11 BIT12 BIT13 BIT14
BIT14