Avaya Definity SI, Maintenance Manual, Page: 907 / 2968

AN-LN-PT (Analog Line Port)
Issue 4 May 2002 10-121 555-233-123
1018 ABORT Administration has disabled the test. The default for the
Test?
field on the station form is y. Determine why this field has been
set to n on this station (this may be due to the ringing
application Test #48, which can be disturbing to customer or
terminal equipment).
1. To enable the test for a particular station being tested,
enter change station extension.
2. Change the
Test?
field on the station form to y.
1392 ABORT This port is currently a TTI port and the test does not execute
on it.
1. Verify that the port is a TTI port:
■
Enter the display port UUCSSpp command (the
display shows that the port is a TTI port).
■
Enter the list configuration command (the display
shows a
t
for the port).
2. If both commands indicate that the port is a TTI port, the
abort is correct for the test, and no action is necessary.
3. If either command indicates that the port is
not
a TTI port,
escalate the problem.
2000 ABORT Response to the test request was not received within the
allowable time period.
2100 ABORT System resources required to run this test are not available.
1. Retry the command at 1-minute intervals no more than 5
times.
2. If the test continues to abort, escalate the problem.
Table 10-40. TEST #35 Battery Feed Test — Continued
Error
Code Test
Result
Description/Recommendation
Continued on next page