Avaya Definity SI, Maintenance Manual, Page: 1638 / 2968

Maintenance Object Repair Procedures
555-233-123 10-852 Issue 4 May 2002
Monitor download progress
1. Type status firmware download and press
Enter
.
The Status Firmware Download screen ( Screen 10-8 ) displays.
Screen 10-8. Status Firmware Download screen
2. If this form is blank after issuing the command, go to Step 4.
3. Check the
St
(status) field immediately to the right of the
Target
Location
field’s address of the circuit pack to view the progress of the
firmware update:
■
(P)ending
■
(C)ompleted
■
(F)ailed
■
(A)borted
4. Type status firmware download last and press
Enter
.
This allows you to view the progress of the last completed firmware update
or the entire schedule if it is completed.
!
CAUTION:
The ftplogin and ftppassword will remain on the TN799DP (C-LAN)
and TN2501AP (VAL) circuit packs until they are reset or until you
issue the disable filesystem board <UUCSS> command.
status firmware download Page 1 of 1
STATUS FIRMWARE DOWNLOAD
Source Board Location: 01C02
Firmware Image File Name: tn2501ap_f05.bin
Target Board Code: TN2501 Suffix: AP Firmware Vintage: _
Schedule Download? _ Remove Image File After Successful Download? _
Start Date/Time: 01/12/2001 13:30 Stop Date/Time: 01/14/2001 16:30
Target Target Target Target Target
Location St Location St Location St Location St Location St
1.01C02 P 11. _____ _ 21. _____ _ 31. _____ _ 41 _____ _
2. _____ _ 12. _____ _ 22. _____ _ 32. _____ _ 42 _____ _
3. _____ _ 13. _____ _ 23. _____ _ 33. _____ _ 43. _____ _
4. _____ _ 14. _____ _ 24. _____ _ 34. _____ _ 44. _____ _
5. _____ _ 15. _____ _ 25. _____ _ 35. _____ _ 45. _____ _
6. _____ _ 16. _____ _ 26. _____ _ 36. _____ _ 46. _____ _
7. _____ _ 17. _____ _ 27. _____ _ 37. _____ _ 47. _____ _
8. _____ _ 18. _____ _ 28. _____ _ 38. _____ _ 48. _____ _
9. _____ _ 19. _____ _ 29. _____ _ 39. _____ _ 49. _____ _
10. _____ _ 20. _____ _ 30. _____ _ 40. _____ _ 50. _____ _
Status: Pending(P) Completed(C) Failed(F) Aborted (A)