Maintenance Object Repair Procedures
555-233-123
10-1498
Issue 4 May 2002
■
Enables shadowing from Active SPE Memory to Standby SPE Memory and
causes all of Active SPE Memory to be written to Standby SPE Memory (a
refresh operation).
■
Disables shadowing from Active SPE Memory to Standby SPE Memory.
■
Requests the Standby SPE Maintenance/Tape Processor to release the
Standby SPE Processor for the Standby SPE Processor to perform a RAM
checksum test on Standby SPE Memory (just updated by the refresh
operation).
■
Waits for Standby SPE Processor to report the results of the RAM
checksum test.
■
Requests the Standby SPE Maintenance/Tape Processor to hold the
Standby SPE Processor reset.
■
Enables shadowing from Active SPE Memory to Standby SPE Memory and
causes all of Active SPE Memory to be written to Standby SPE Memory (a
refresh operation).
Flash-based systems
■
Disables shadowing from Active SPE Memory (MEM-BD) to Standby SPE
Memory.
■
Requests the Standby SPE Maintenance/Tape Processor (PR-MAINT) to
release the Standby SPE processor (PROCR) for the Standby SPE
Processor to clear a magic area in Standby SPE Memory.
■
Requests the Standby SPE Maintenance/Tape Processor to hold the
Standby SPE processor reset.
■
Enables shadowing from Active SPE Memory to Standby SPE Memory and
causes all of Active SPE Memory to be written to Standby SPE Memory (a
refresh operation).
■
Disables shadowing from Active SPE Memory to Standby SPE Memory.
■
Requests the Standby SPE Maintenance/Tape Processor to release the
Standby SPE Processor for the Standby SPE Processor to perform a
verification on the magic area in Standby SPE Memory (just updated by the
refresh operation).
■
Requests the Standby SPE Maintenance/Tape Processor to hold the
Standby SPE Processor reset.
■
Enables shadowing from Active SPE Memory to Standby SPE Memory and
causes all of Active SPE Memory to be written to Standby SPE Memory (a
refresh operation).
NOTE:
The shadowing verification method used for 80386 systems does not
do a complete RAM checksum. It only clears a special magic area in
the Standby SPE’s memory and then updates that area by
shadowing. It then verifies the value in that magic area based on the
Summary of Contents for Definity SI
