Avaya Definity SI, Maintenance Manual, Page: 2890 / 2968

Error Messages from Chapter 8: Maintenance
Commands
555-233-123 A-86 Issue 4 May 2002
The following is a description of the values:
All fields on page 2 may have the same values. Pressing
HELP
in any field on page
2 gives the following field help message:
Enter alarm group number: 1 to 4
The alarm group number is a way of distinguishing four different groups of alarms.
These alarm groups allow the user to specify that alarms in different groups are
handled differently from those in other groups.
Field Error Messages
All of the fields on the first page allow the same values. Only one error message is
printed for all first page fields. If the value is not one of the listed characters
(m,n,r,w,or y) then the following message appears:
“X” is an invalid entry; please press HELP key
All of the fields on page 2 allow the same values. If the value in one of these fields
is not numeric, the following message appears:
Entry must be all digits
All of the fields on pages page 2 allow the same values. If the value in one of
these fields is a digit other than 1, 2, 3, or 4, the following message appears:
Entry out of range
set signaling-group
Help Messages
If the system technician presses
HELP
after entering “set signaling-group,” the
following appears:
Enter group identifier
m(inor) Downgrade the major alarm to a minor alarm and report the alarm to INADS.
n(o) Do not log the alarm or report it to INADS.
r(eport) Downgrade the alarm to a warning and report the warning to INADS.
w(arning) Downgrade the alarm to a warning, log it but do not report the alarm to INADS.
y(es) Log and report the alarm to INADS.