Avaya Definity SI, Maintenance Manual, Page: 2493 / 2968

TDM-BUS (TDM Bus)
Issue 4 May 2002 10-1707 555-233-123
Error Log Entries and Test to Clear Values
NOTE:
For TDM-BUS, an ON-BOARD alarm refers to a problem with the TDM-BUS
itself.
Notes:
a. The TDM Bus has been busied out by the technician. The error retires
when the technician releases the TDM Bus.
b. This error indicates the TDM Bus is corrupted. If the corruption was on the
Control Channel bus and this system has High or Critical Reliability, TDM
Bus maintenance automatically switches the control channel and/or tones
to the other bus. The same strategy applies if the corruption was on the bus
carrying the tones.
An aux data value of 0 indicates the last reported TDM Bus corruption was
on the Control channel bus.
Table 10-625. TDM Bus Error Log Entries
Error Type
Aux
Data Associated Test
Alarm
Level
On/
Off
Board Test to Clear Value
0
1
1 Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the
appropriate test description and follow the recommended procedures.
0 Any Any Any test tdm
1 0 Control Channel Test
(#296) MINOR ON test tdm P r 3
18 (a) 0 busyout tdm PC WARNING ON release tdm PC
35 (b) 0-1 TDM Bus Corruption MINOR ON set tdm PC
257 (c) 0 none MAJOR ON
513 (d) Any Idle Time Slot Test (#294) MINOR ON test tdm P r 3
769 (e) Any Idle Time Slot Test (#294) WARNING ON test tdm P r 3
769 (f) Any Idle Time Slot Test (#294) (see Notes)
1025 Any
3872 (g) Any none
3873 (g) Any none
3874 (g) Any none
3877 (g) Any none