Avaya Definity SI, Maintenance Manual, Page: 2229 / 2968

RDIG-STA (Remote Digital Station)
Issue 4 May 2002 10-1443 555-233-123
RDIG-STA (Remote Digital Station)
A per-port instance of this maintenance object (RDIG-STA) is used to maintain the
circuitry associated with a port which has been translated as a digital station (or
DCP Console). The combo blade circuit board has the capability of having 24
instances of this type of maintenance object.
Remote Digital Station maintenance software provides maintenance for a port
administered as a digital station on the circuit pack. This strategy covers the
in-line errors log, initialization tests, periodic tests, craft-demanded tests, and
alarm resolution and escalation. Each port, translated as a digital station on a
digital line board, is running as a separate maintenance object (RDIG-STA) of this
type. Fault conditions discovered on one maintenance object may or may not
indicate faults on other maintenance objects of the same type.
Maintenance testing for the port circuitry on the combo blade circuit packs is
handled by on-board firmware and SPE (switch) controlled tests. Maintenance
software queries the firmware for error and alarm information, status, and test
results. Firmware automatically reports in-line error conditions, which results in
SPE-controlled testing.
MO Name (in
Alarm Log) Alarm
Level
Initial Command to Run
1
1 UU is the universal cabinet number (1 for PPN, 2 or 3 for EPNs). C is the carrier
designation (A, B, C, D, or E). SS is the number of the slot in which the circuit pack
resides (01 to 21). pp is the two digit port number (01, 02, ...).
Full Name of MO
RDIG-STA MINOR test station UUCSSpp l Remote Digital
Station
RDIG-STA WARNING test station UUCSSpp sh Remote Digital
Station