Avaya Definity SI, Maintenance Manual, Page: 693 / 2968

test hardware-group
Issue 4 May 2002 8-443 555-233-123
Setting the Test Parameters
Once the user has entered the desired action (test hardware-group) and the
object (board, carrier, etc.), then an options form displays.
Field descriptions
Test
sequence
Short (nondestructive) or long (more comprehensive, still
nondestructive) test sequence
Test
Repetition
repeat - (1-99) each test is executed the number of times
specified on each physical object.
continuously -all tests on all the specified hardware run until
cancelled by either pressing the
CANCEL
key or by executing the
cancel hardware-group command.
count:
Repeat test sequence value (1-99). If the Test sequence field
is set to continuously, then this field disappears from the screen;
if this field is set to repeat, then the field appears.
Auto-page?
Provides a new screen every time the SAT screen fills with test
results. (n / y). The screen does not scroll to accommodate new
results; instead a new screen is provided after the current screen
fills up.
If the auto-page option is not selected, the SAT screen does not
refresh once it is filled, and testing stops until the user enters the
PAGE
key to continue or the
CANCEL
key to cancel the testing.
This option is not allowed if the background option is selected.
test hardware-group system Page 1 of 1
TEST HARDWARE-GROUP SELECTIONS
Select the desired options for the specified test.
Test sequence: short
Test repetition: repeat count: 1
Output OPTIONS: HARDWARE OPTIONS:
Auto-page? n All-ports? n
Background? n SPE-interchange? n
Failures? n