Avaya Definity SI, Maintenance Manual, Page: 642 / 2968

Maintenance Commands and Trouble-Clearing Aids
555-233-123 8-392 Issue 4 May 2002
status system
This command displays the status, mode, and operational attributes of the
SPE(s), TDM and Packet busses, tone-clock circuit packs, expansion interface
links (exp-links), and emergency transfer switch of cabinets in the system.
!
CAUTION:
This command provides general information about the cabinet status. This
information may not display correctly when the cabinet is in a transient
period. In this case, wait for 1 minute and enter the command again.
Output
The following example shows the output from status system all-cabinets.
Action/
Object
Qualifier Qualifier Description Logins Default
Feature
Interactions
status
system cabinet 1st-cabinet: PPN
2nd-cabinet: 1st EPN
3rd-cabinet: 2nd EPN
1
all-cabinets: 3-pg. output - 1 for each cabinet
2
Examples:status system 1st-cabinet
status system 2nd-cabinet
status system 3rd-cabinet
status system all-cabinets
1 For PPN, and 1st and 2nd EPNs, one page of output displays.
2 The status displayed for a cabinet is always related to that cabinet except in the case of status for EPNs and the
SPE attributes. SPE attributes always refer to PPN status regardless of which cabinet is being displayed.
init
inads
craft
cust
rcust
bcms
browse none none
status system all-cabinets Page 1 of 3 SPE B
SYSTEM STATUS CABINET 1
SELECT SPE ALARMS TONE/ SERVICE SYSTEM SYSTEM
SPE MODE SWITCH MAJOR MINOR CLOCK STATE CLOCK TONE
1A busyout/not-refreshed auto n y 1A in standby standby
1B active auto n n 1B in active active
SERVICE CONTROL DEDICATED SERVICE BUS ALARMS BUS OPEN BUS
TDM STATE CHANNEL TONES PKT STATE MAJOR MINOR FAULTS LEADS
1A in y n 1 in n n 0 0
1B in n y
EMERGENCY SELECT SERVICE CABINET
TRANSFER SWITCH EXP-LINK STATE MODE TYPE
1A auto-off 01A01-02A01 out down SCC
1B auto-off 01B01-02B02 in active
01A02-03A01 in active
01B02-03B02 in standby