Avaya Definity SI, Maintenance Manual, Page: 651 / 2968

status trunk
Issue 4 May 2002 8-401 555-233-123
Output
The following display shows a typical result when status trunk 20/1 is entered.
Trunk Group/
Member
Group and member numbers of specified trunks.
Port
The location of the port associated with the trunk.
Signaling
Group ID
For ISDN trunks, the number of the signaling group to which the
trunk group belongs. For other trunk types, the field is blank.
Connected
Ports
Locations of ports currently connected to the trunk.
Service
State
One of the following states is displayed: in-service/active,
in-service/idle, out-of-service, out-of-service-NE (Near End),
out-of-service-FE (Far End), maint-NE/active, maint-FE/active,
maint-NE/idle, maint-FE/idle, pending-in-service, pending-maint, or
disconnected. NE (Near End) and FE (Far End) refer to which end
of the trunk has placed the facility in its current state. Explanations
of these service states for each type of trunk appear in the
maintenance object descriptions in Chapter 9, “Maintenance Object
Repair Procedures”.
Maintenance
Busy
Whether maintenance testing is currently being performed upon the
trunk.
CA-TSC State
The status of the call-associated temporary signaling connection, if
any. A TSC is a temporary connection set up to pass call
information over ISDN-PRI signaling links.
Audio
Connection
Type
Shows ip-tdm, ip hairpin, ip direct, or ip idle.
Audio Switch
Port
Shows a virtual port number (i.e., one starting with T). If a trunk is in
ip-idle state, the audio switch port field shows blank.
status trunk 20/1
TRUNK STATUS
Trunk Group/Member: 020/001 Service State: in-service/idle
Port: 01D0801 Maintenance Busy? no
Signaling Group ID: 1 CA-TSC State: none
Connected Ports: